Multi Fuel Stoves With Back Boiler
A multi fuel stove with back boiler lets you to run a full heating system within your home as well as provide hot water. They come with 2 water ports (1x flow and return) that are sized at 1 inch BSP and can be connected to pipe work with standard compression fittings.
Here are a few examples of
Multi fuel stoves that have a back boiler can be used to burn a variety of other materials than logs, which allows you to choose from a wider range of sources of heat, which can help you save money and reduce your carbon footprint. This is because multi fuel stoves were made to work with a greater variety of substances and will burn them more productively than wood-burning stoves. Multi fuel stoves with back boilers are able to burn smokeless coal turf, peat briquettes or turf as well as standard logs. They can be fitted with raised grates with moving bars, or with central riddling grate and an asphan. Both of these will allow the device de-ash regularly. The ash is contained in an asphan below the area of combustion to allow the safe and easy removal.
Boiler stoves can provide an output of heat that ranges from to 21 kw (14kw for water heating and 7kw for space heating) according to the model you choose. They can be connected to an accumulator tank for hot water or a conventional boiler system, allowing them to operate with solar panels, if needed. The boiler is situated inside the stove and is usually on the side or back of the firebox. It is constructed of steel that is rolled thickly and not the fragile cast iron.
This means it's built to withstand greater temperatures than cast iron stoves and is therefore less susceptible to corrosion. The boiler is available with the stove pre-installed or as an additional add to the stove, and there are usually two (sometimes four) pipes that extend from the rear of the stove to connect to plumbing pipes.
The pipes can be connected to the hot water cylinder or directly into the radiator circuit in your home, with pumps turning on when the temperature of the water in the tank exceeds a certain level. This ensures that your radiators are heated first and foremost before hot water for bathing and cooking is available - a great way to reduce your costs while also preventing cold winter conditions.
Benefits
A multi-fuel stove with back boiler can provide additional advantages for heating your home. In addition to the heat it generates from burning wood and other types of solid fuels, a multi fuel stove that has a back boiler is also able to heat your hot water system. You can cut down on the amount of gas, oil or electricity you use at home, as well as reduce carbon emissions.
The heat produced by the multi-fuel stove that includes the back boiler is used to preheat the cold water that flows through the bottom. The hot water is used to heat your home and may even be used for domestic hot water taps as well as bathing too.
When installed correctly Ongoing can be used to provide hot water for a smaller or larger central heating system or thermal store, giving you more energy efficiency and lower energy costs within your home. It can also be paired with solar panels or underfloor heating to further reduce your home energy costs and carbon footprint.
A multi-fuel stove that has a back boiler can be used to run a small, simple wood-burning central heating system or to connect to an accumulator tank for hot water, making it a very versatile and cost-effective method of heating your property. You can also combine the log burner and back boiler with your gas central heating system to save money on running and installation costs.
Eco Design 2022 compliant stoves use six times less fuel than older models, reducing the cost of fuel and your environmental impact. There are a range of models available, ranging from those that simply heat water to those that can heat up to 22 radiators, and offer hot water for the entire household.
The majority of multi-fuel stoves that have back boilers feature an easy bolt-in system. Two pipes are protruding from the rear of the stoves and are able to connect to plumbing pipework. Other styles are fitted with a water jacket which means that the body of the stove has an opening that can be filled with water, and is usually with a pump to circulate the hot water.
Installation
The Ruben is an impressive stove with an enormous glass window of ceramic as well as silver door handles/controls. It also has an integrated back boiler that can be used for hot water and central heating (upto 7kw for water heating & 8kw to room heating). It has two water ports at the rear of the stove (1x flow and one return) sized at 1.0 inch BSP (male 1 "''). It can be used with vented or non-vented stoves.
A multi-fuel stove with back boilers can be attached to a central heating system with a simple non return valve or to an energy storage tank that has an overheat valve. A thermal storage tank is a water tank that is insulated that acts as a neutral point to the heat generated by the stove and stores it until needed.
To fit a wood burner with back boiler you will have to ensure that your local authority is able to allow it and that the insurance company is satisfied with the work done on a stove that isn't listed as having a back boiler. You will also need to ensure that your plumbing system is capable of handling the additional power that's expected to be generated. In most cases, you'll need to re-plumb the system to allow this to happen.
If your installer has experience in this sort of work then they'll be able to guide you on what is needed. Beware of sanitary plumbers who claim to be heating engineers using solid fuel. They may not know the fundamentals of this kind of system. Stovesellers has been contacted on numerous occasions to fix the mess left by other tradesmen. We only advise you to choose a competent engineer.
It is essential to know that you will need larger capacity cylinders for a multifuel stove with back boiler and the heat output from the stove will need to be match to the home to ensure that you don't run out of water and spending money. This can be accomplished by dividing the total cubic meter of the room (length x width x height) by 14, and then selecting the appropriate model based on this information.
Maintenance
A multi fuel stove that has a back boiler is a heating appliance that is able to heat both hot water and radiators within your home. These stoves are ideal for those with smaller homes or who want to reduce their carbon foot print by not relying on central heating systems.
The back boiler of these types of stoves is a long loop of pipe that connects to the hot water tank and the radiators in your home. The thermostat in your home will check the temperature in this loop. When it reaches the set level the pump will then start to turn on. This will ensure that the heating of your home is controlled and prioritized.
A multi-fuel stove with a back boiler allows you to burn wood as well as coal. This allows you to have more flexibility when it comes to your heating source. It is crucial to keep in mind that the boiler doesn't offer free energy, and you will have to make sure you have enough logs to satisfy your requirements.
It is crucial to follow the safety guidelines in your region and country when installing a multi-fuel stove that has back boiler. This includes the location and distance of your stove from combustible surfaces. You will typically find these guidelines in the manual of your stove or by consulting local building codes.
A common mistake people make when installing a multi-fuel stove with back boiler is to not prepare the hearth for it. This can lead to a variety of problems down the line and it is very important to follow the correct procedures.
The best way to make sure that your multi fuel stove with back boiler is installed correctly is to have it professionally installed by an engineer who is registered as a heating engineer or HETAS technician. They will be able to check that the stove is compatible with your existing system and ensure that it meets all UK safety regulations.